W R Meadows MEL DRAIN TOTAL DRAIN
Prefabricated Soil Drain System
W R Meadows MEL DRAIN TOTAL DRAIN sheet drain system combines any regular MEL-DRAIN sheet drain section with the unique TOTAL-DRAIN section. In this system, the regular sheet drain performs its normal function of water collection, while the TOTAL-DRAIN section provides both water collection and a high-profile section for water flow to the designed drainage exits. TOTAL-DRAIN is a two-part, prefabricated geocomposite drain consisting of a formed 24″ high HIPS core covered on one side with a non-woven, needle-punched polypropylene filter fabric. The top section is 12″ of 7/16″ core for water collection. The bottom section is 12″ of 1″ thick for water collection and horizontal water flow to designated exits.
DESCRIPTION:
The MEL-DRAIN™ TOTAL-DRAIN sheet drain system combines any regular MEL-DRAIN sheet drain section with the unique TOTAL-DRAIN section. In the TOTAL-DRAIN system, the regular sheet drain performs its normal function of water collection, while the TOTAL-DRAIN section provides both water collection and a high-profile section for water flow to the designed drainage exits. This product is a two-part, prefabricated geocomposite drain consisting of a formed 24″ high HIPS core covered on one side with a non-woven, needle-punched polypropylene filter fabric. The top section is 12″ of 7/16″ core for water collection. The bottom section is 12″ of 1″ thick for water collection and horizontal water flow to designated exits. The fabric allows water to pass into the drain core while restricting the movement of soil particles, which might clog the core. The core allows the water to flow to designated drainage exits. Full-coverage protection is provided to waterproofing materials.
USES: MEL-DRAIN™ TOTAL-DRAIN will work with any original MEL-DRAIN drainage product.
FEATURES/BENEFITS:
- The high-profile flow section has a larger open area than does perforated pipe to accept high flows from the sheet drain and from the surrounding soil.
- The TOTAL-DRAIN section, with its manufactured transition between sheet drain and high-profile section, provides a secure flow path, which is not dependent on field installation.
- The system is fast and easy to install. Eliminates select backfill required to give perforated pipe strength. Standard connectors and corner guards are available.
MEL-DRAIN TOTAL-DRAIN Section Properties:
Flow Capacity
Sheet Drain, gpm/ft. of width ASTM D 4716 | 21 @ HG = 0.1 |
High Profile, gpm | 100 @ HG = 1.0 |
ASTM D 4716 Compressive Strength, lb./sf | 9,000 |
ASTM D 1621 Roll Length, ft. | 50 |
Roll Width, ft. | 2 |
Roll Weight, lb. | 30 |
MEL-DRAIN Rolled Matrix Drainage Installation Instructions Using TOTAL-DRAIN or Pipe
REQUIRED MATERIALS:
- 2′ x 50′ rolls of TOTAL-DRAIN sheet drain
- 4′ x 50′ rolls of MEL-DRAIN rolled matrix drainage if full wall drainage is required
- TOTAL-DRAIN sheet drain corner guards
- 4″ (101.6 mm) wide PERMINATOR TAPE from W. R. MEADOWS.
- Attachment materials (see below)
- Knife or scissors
- Rubber hammer
Additional information
Weight | 48 lbs |
---|---|
Dimensions | 12 × 12 × 16 in |
Length | 2'x50' Roll |
Search
Product Categories
- All Products (202)
- Anchors/Ties (4)
- Concrete Block (7)
- Concrete/Masonry Air and Water Barriers (34)
- Concrete/Masonry Cleaners (33)
- Concrete/Masonry Water Repellants (5)
- Concrete/Mortar Products (32)
- Joint Filler (2)
- Mortar (1)
- Polyurethane Grout (8)
- Protective Coating (1)
- Reinforcement wire (1)
- Restoration Anchors (4)
- Tools (85)
- Concrete (12)
- Masonry (29)
- Mortar and Grout Tools (16)