}

Monday – Friday, 7am – 4:00pm EST

SMART Building Supply

Mortar Net Complete Flash

$295.00

Clear

Mortar Net Complete Flash High Corner Boots:

Mortar Net Complete Flash are tough 14″ high inside/outside preformed corner boots for masonry cavity walls are only available from Mortar Net Solutions™. They are superior to typical 8″ corner boots because they extend above the standard flashing height and make it easy to create a consistently high-quality corner every time.

Features

  • One-piece, preformed, injection-molded, highly puncture-resistant
  • Available in thermoplastic polyolefin (TPO) and synthetic rubber/polypropylene (SR)
  • TPO is compatible with ethylene propylene diene terpolymer (EPDM), thermoplastic vinyl (PVC), thermoplastic polyolefin (TPO), copper (both cold rolled and fabric), and stainless-steel flashings currently on the market
  • SR is compatible with ethylene propylene diene terpolymer (EPDM), rubberized asphalt, thermoplastic polyolefin (TPO), copper (both cold rolled and fabric), and stainless-steel flashings currently on the market
  • Excellent adhesion to common adhesive/sealants

 

14" High Preformed Corner Boots
Benefits
  • Fast, easy installation
  • Reduce the chances of leaks
  • Eliminate the need for field fabrication
  • Create a consistently formed corner every time
  • Easy to make a watertight seal with standard flashing

Sizes and Packaging:

PRODUCT  BASE SIZE HEIGHT  WIDTH PIECES/BOX 
Outside corner 10″ 14″ 6″ 25
Inside corner 6″ 14″ 6″ 25

Mortar Net CompleteFlash® End Dams:

These rugged one-piece preformed end dams are a key component of leak-proof flashing installations and flashing systems.  They seal securely to flashing membranes and prevent water from leaking around the lintel ends over windows, doors and other wall openings, and at the termination points of flashing runs.

Features

  • One-piece, preformed, injection-molded, highly puncture-resistant
  • Available in Right, Left and Universal (right or left) configurations
  • Available in thermoplastic polyolefin (TPO), and a synthetic rubber/polypropylene (SR)
  • TPO is compatible with ethylene propylene diene terpolymer (EPDM), thermoplastic vinyl (PVC), thermoplastic polyolefin (TPO), copper (both colds rolled and fabric), and stainless-steel flashings currently on the market
  • SR is compatible with ethylene propylene diene terpolymer (EPDM), rubberized asphalt, thermoplastic polyolefin (TPO), copper (both colds rolled and fabric), and stainless-steel flashings currently on the market
  • Excellent adhesion to common adhesive/sealants
    PRODUCT  DEPTH HEIGHT  WIDTH PIECES/BOX 
    Universal end dams 4″ 3″ 4″ 50

Additional information

Weight 40 lbs
Dimensions N/A
Types

Inside Corner Boot, Outside Corner Boot, Universal End Dam